Suite 7.1 Installation Manual
www.ada-usa.com 25
Storing Master Volume and Maximum Volume Levels into Memory
1. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall.
2. Rotate the Mode knob until the cursor is over the V in T/B/VOL SET.
3. Press the Mode knob. The display will show the current master volume and maximum volume
level. The cursor will flash over the
V in VOLUME STORE 1.
4. Rotate the Input knob to select the desired master and maximum volume preset number (1 –4).
5. Rotate the Volume knob clockwise until the desired master volume level is reached.
6. Rotate the Input knob until the cursor reaches the letter
V on the bottom line.
7. Rotate the Input knob to set the maximum attainable master volume level.
8. Rotate the Mode knob until the cursor flashes over the
V in VOLUME STORE 1.
9. Press the Input knob. The display will flash
VOLUME STORE to indicate that the levels have been
stored into memory.
Recalling the Master and Maximum Volume Levels
Once the master and maximum level presets are stored into memory, they can be easily recalled. In
most cases, you will access a volume preset with a single press of a button on a remote control, touchscreen,
or even in a macro. However, you can access the balance preset recall from the front panel by the
following method:
1. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall.
2. Rotate the Mode knob until the cursor is flashing over the V in VOL RECALL.
3. Rotate the Input knob until the desired balance preset recall number is displayed
4. Press the Mode knob. The display will flash V RECALLED and the recall number on the top row.
Pro Setup Overview
The Pro Setup menu is where you set the follow important parameters for surround sound decoding
including, speaker levels, bass management, and channel delays. The Pro Setup menu is also where you
can assign and label each input, limit the number of inputs, and set the ADA Bus baud rate and
address. All the additional options within the Pro Set menu are also described in detail below:
Pro Setup Level One: Input labeling and Input Assignment
A/V Input Default Labels
The default labeling for the inputs were designed to accommodate most systems without the need for
renaming. The default labeling is listed below. However, if you want to change the default labels, you
can do so in Pro Setup.
Accessing the Pro Setup Menu
1. Press and hold the Mode knob until the display changes to the Tone, Balance, and Volume recall.
2. Rotate the Mode knob until the cursor is flashing over the P in PRO SETUP.
3. Press the Mode knob. The display will change to the Pro Setup menu and the cursor will flash over
the L in LABELS/AV.
4. Once you are in the Pro Setup mode, you can exit it by navigating to arrow next to the M > and
pressing the mode knob. This sends you back to the main control display.
5.
Y
ou can access the previous display by navigating to arrow next to the <P and pressing the mode
knob.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern